Stop losing precious water from your leaking dam or pond & try our Water$ave Seep dam sealer. This DIY solution is applied directly to the water surface by hand or with the use of a small spreader. No need to drain your dam or use costly earthmoving equipment.  If the leak has been located, even better, you only have to treat that area & not the whole dam.

What is Water$ave Seep? It is super-absorbent polymers in a dry, powdered form.  When applied to the water surface the polymer particles will begin to hydrate & expand, descending to the bottom of the dam. The weight of the water forces the polymer into the cracks & voids, where it continues to expand, creating a plug to stop the leak. For best results any obstructions, such as weeds & debris, should be removed before application, as these may stop the polymer finding their way into the leaks.

Water$ave Seep is used for slower leaks in finer soil types. Doesn’t sound like your leak? Head to our Earthen Dam & Ponds page to find out which dam sealer is best for you.

Water$ave Seep is not just for Australian dam & ponds, Seep seals leaks all over the world. Take a look at what Duane, from OHIO USA had to say after using Water$ave Seep:

This product is Amazing !! I sprinkled about 1/3 of the pail into the leak area & within 12 hours it had expanded & sucked into the holes through all the gravel! It is actually down to the smallest trickle now & we just had a huge rainstorm that brought the pond up over a foot. Now if it stays plugged I will have a full pond for the rest of the year. I am so glad I found you. Duane

Water$ave Seep available now.