+61 2 6571 5177

Toggle Nav
My Cart
Water$ave Hydro-Tac Calculator


  • Water$ave Hydro-Tac application rates vary depending upon water retention desired, soil retention desired & soil type.
  • A representative can customise the correct application rate of Water$ave Hydro-Tac for your project.
  • Conversion: 1m2 = 10.76ft2 = 1.196yds2.
  • Water$ave HY Hydro-Tac is available in 2.5kg bags, 5kg, 10kg, 15kg & 18kg pails. Click Here to visit the Online Store for individual products to see how much treatment each size will provide.

The average application rate of Water$ave Hydro-Tac = 1.5kg/1000ltr of water & will cover 1000m2.



Good news story


My husband and I bought our property back in 2008 with the knowledge that only one of the two dams held water. We love living in the bush but as the y...

- Megan Boro NSW

I recently purchased a 10kg pail of polymer. Having spoken to your customer service officer about how to apply it to my dam, I am very pleased to give some feedback.


I used about half of the pai...

- Mike Willey Sulky, Vic

It's been almost 2 months since I treated our pond with your product.  We have had about 6 inches of rain since and the pond looks great.  The wetness below the dam is gone and the water level is holding. Bottom line is I am very impressed with...

- Bill Hille Horsecamp qld

It has now been a 2 months since I had the dam scraped out to get rid of all the weed etc. As it filled I sprinkled in your product and for the first time in 17 years it is holding water.

- Pat