If your dam or pond is losing water, every drop counts. A leaking dam doesn’t just impact water supply – it affects livestock, crop irrigation & property value. Water$ave Dam Sealer offers a smart, cost-effective solution that seals leaks from within, without the need for drainage or expensive machinery. This step-by-step guide explains how to use Water$ave to restore water retention in your dam using only gravity, time & a scoop.
What Is Water$ave Dam Sealer?
Water$ave is a super-absorbent polyacrylamide-based polymer developed to seal leaks in earthen dams & ponds. Once applied, it is drawn into cracks, tunnels, or porous zones where it swells with water to form a strong, flexible plug. This plug reduces or completely stops water loss by blocking leak pathways internally — much like how clay liners work, but without excavation.
Water$ave Dam Sealers are completely safe when used as directed and has been successfully applied in thousands of rural & industrial projects across Australia & USA. It is particularly suited for DIY use, making it an accessible solution for landowners & managers.
Step-by-Step Application Guide
Step 1: Identify the Leak Location
Before applying Water$ave Dam Sealer, spend time observing the dam to determine where water loss is occurring. You might notice
- Water levels dropping more rapidly than expected from evaporation.
- Damp patches forming on the outside of the wall or base.
- Cracks, animal burrows, or unusual flows near the embankment.
If the source is not clearly visible, don't worry — Water$ave Dam Sealers are designed to migrate toward the leak source through natural water movement. You can also reach out to us for a free dam assessment with one of our Dam Experts to confirm your needs.
Step 2: Prepare the Application Area
Clear the water surface of debris such as leaves, twigs & aquatic weeds, especially above the suspected leak zone. This ensures the polymer granules can travel freely to the leak path. If possible, allow the water level to rise before application. A higher water column will help push the polymer down into deeper cracks or tunnels.
Step 3: Apply Water$ave Dam Sealer
Simply scoop or broadcast the product evenly over the dam surface, focusing on the area above the suspected leak. The granules float briefly before sinking & dispersing throughout the water column. As they settle, they are drawn into leak pathways & voids, where they expand on contact with moisture to form a plug.
The product works without any agitation or mechanical mixing. It requires no special tools or equipment. The natural water flow & pressure do the work for you.
Step 4: Wait & Monitor Results
Allow the dam to sit undisturbed for a period of 2 to 3 weeks. During this time, the polymer will continue to settle & expand inside the leak points. Most users see a significant reduction in leakage within days, with full sealing effectiveness occurring within the first few weeks.
Water$ave is compatible with a wide range of soil types & dam designs. However, for large or heavily leaking dams, a second application may be required for complete sealing.
Choosing the Right Water$ave Product
There are two key formulations of Water$ave Dam Sealer, each suited to different dam conditions:
- Water$ave Plug is ideal for coarse soils or rapid leaks that originate from the dam base. It contains larger polymer particles that settle more quickly & targets fast-flowing leaks.
- Water$ave Seep is designed for finer soils such as loam or sand & is better suited to seepage through dam walls. Its fine-grained particles remain suspended longer, helping them penetrate small voids & finer leak paths.
If you’re unsure which product is best for your dam, our team is here to help. You can send photos or dam details via our online form or give us a call for tailored recommendations.
Why Choose Water$ave?
What sets Water$ave Dam Sealers apart is their ease of use & proven effectiveness. There’s no need for excavators, liners or chemical additives. It’s 100% DIY-friendly, environmentally safe when used correctly & can save thousands in repair costs & water loss.
Farmers, landowners, councils & contractors across Australia continue to rely on Water$ave Dam Sealers for reliable, long-term leak sealing. Whether you manage a small stock dam or a large catchment pond, there’s a Water$ave solution to suit.
Get Started Today
If your dam is leaking, don’t wait until water levels drop further. Learn more about the Water$ave range, explore FAQs, or get a quote.
Still have questions? Contact our team for free advice or a personalised dam assessment; we’re here to help you make the best decision for your water management needs.
Comments