Water$ave Hydro-Tac Calculator
- Home
- Support
- Polymer Calculator
- Water$ave Hydro-Tac Calculator
- Water$ave Hydro-Tac application rates vary depending upon water retention desired, soil retention desired & soil type.
- A representative can customise the correct application rate of Water$ave Hydro-Tac for your project.
- Conversion: 1m2 = 10.76ft2 = 1.196yds2.
- Water$ave HY Hydro-Tac is available in 2.5kg bags, 5kg, 10kg, 15kg & 18kg pails. Click Here to visit the Online Store for individual products to see how much treatment each size will provide.
The average application rate of Water$ave Hydro-Tac = 1.5kg/1000ltr of water & will cover 1000m2.
TESTIMONIALS
Recently got 2 pails of your product; fantastic only evaporation is drinking the water. Thanks for advise from Mark. Great stuff , I’m spreading word.
- Den Houghton ROLLESTON, QLD
I used your product recently to seal a dam & the results were astoundingly good. I am very impressed with this product.
- Michael Wilson
This product is Amazing !! I sprinkled about 1/3 of the pail into the leak area and within 12 hours it had expanded and sucked into the holes through all the gravel ! It is actually down to the smallest trickle now and we just had a huge rainst...
- Duane OHIO, USA
It's been almost 2 months since I treated our pond with your product. We have had about 6 inches of rain since and the pond looks great. The wetness below the dam is gone and the water level is holding. Bottom line is I am very impressed with...