
Leaking dams & ponds can lead to serious water loss, reduced agricultural productivity & costly repairs if left untreated. What if there was a simple, affordable solution that doesn’t require draining your dam or hiring heavy machinery? That’s where Water$ave Plug & Water$ave Seep come in. Two innovative, easy-to-use polymer-based products from Polymer Innovations designed to seal leaks in earthen dams & ponds quickly, effectively & safely.
What Are Water$ave Plug & Water$ave Seep?
Water$ave Plug & Water$ave Seep are both dry, granular polymer blends applied directly to the surface of a full or partially full dam or pond. These polymers are drawn into the leaking areas, where they absorb water & swell up to form a seal. There’s no need to drain the dam, remove water or disturb the soil. The products are environmentally friendly, non-toxic & safe for livestock.
Which Product Do I Need?
Choosing between Water$ave Plug & Seep depends on your dam’s soil type, leak location & how fast the water is escaping:
Water$ave Seep
Best for:
- Fine or sandy soil
- Slow leaks in the dam wall
- Water loss less than 150mm per week
- Dams with wet patches or seepage, but no visible water flow outside
Learn more about Water$ave Seep
Water$ave Plug
Best for:
- Coarse or rocky soil
- Faster leaks from the dam base
- Water loss over 150mm per week
- Visible signs of water escaping from outside the dam
Learn more about Water$ave Plug
How Do I Apply It?
Before application, clean the surface; Remove weeds, reeds, leaves, or silt that might block the polymer from reaching the soil. Application is simple & can be done by hand or with a spreader. Apply at a rate of 100g per square metre over the affected area. Spread no more than 1.5 metres from the bank unless using a boat for even distribution. Apply during calm weather (no wind or rain).
Most dams show results within 7–10 days & many are sealed after just one application. If the leak persists, a follow-up application may be required.
Why Choose Water$ave?
- No draining required
- DIY application, no machinery needed
- Non-toxic & environmentally safe
- Proven to work where bentonite has failed
- Trusted by farmers, councils & industries across Australia
Customer Feedback
“Can’t thank you guys enough! Took a bit more product than I thought, but my dam that leaked like a sieve is now watertight, full & going great guns.”
— Jamie, NSW
“It works! I had hopes, not doubts & the product sealed the dam exactly as promised.”
— EJ, VIC
Still Not Sure?
If you’re unsure which product is best for your situation, contact the team at Polymer Innovations for a free dam assessment & expert guidance.
Fix your leaking dam the easy way with Water$ave Dam Sealers.
Explore the full range at www.polymerinnovations.com.au
Comments