Singleton

Aust. 02 6571 5177 or Int. +61 2 6571 5177

Toggle Nav
My Cart
breadcrum-img

Controlling Dust: A Polymer-Based Solution for Dry, Dusty Environments

Controlling Dust: A Polymer-Based Solution for Dry, Dusty Environments

In Australia’s dry & windy conditions, managing dust is a critical issue for industries like mining, construction & agriculture. Beyond being a nuisance, dust poses serious risks to worker health, environmental compliance & operational efficiency.

 

While regular watering is the go-to method for many, it often results in short-term relief, high water consumption & recurring maintenance. That’s where Water$ave Dust Suppression (DS) offers a smarter, longer-lasting solution using advanced polymer science to improve dust control without the need for constant watering.

 

What is Water$ave DS?

Water$ave DS is a lineal, anionic polyacrylamide supplied in powdered form. Unlike super absorbent polymers, it is fully water-soluble & designed to interact with both water & fine dust particles in a very specific way. When mixed with water & applied to a dusty surface, it significantly increases the liquid’s viscosity, allowing for greater penetration & retention across the treated area. Once applied, the polymer binds with fine particles, causing them to flocculate (clump together). These heavier, aggregated particles are far less likely to become airborne—even under dry, high-traffic conditions.

 

How It Works

The strength of Water$ave DS lies in its ability to alter water behaviour. By increasing viscosity, the solution doesn't simply wet the surface, it stays on the surface longer & penetrates more effectively. This ensures dust particles are thoroughly coated & bonded together, forming a light crust or stabilised layer over the ground. This process reduces the amount of dust that can be kicked up by wind, vehicles, or foot traffic, leading to cleaner air, safer worksites & far less need for repeated applications.

 

Environmental & Operational Advantages

One of the biggest advantages of Water$ave DS is its ability to cut water usage by up to 50% or more, depending on site conditions. That means fewer water cart runs, lower fuel consumption, & reduced strain on water resources; especially important in remote or drought-prone areas. Water$ave DS is also

  • Non-toxic
  • Biodegradable
  • Environmentally safe

 These qualities make it suitable for use in areas near crops, native vegetation or waterways without risk of contamination or harm.

 

Where It’s Used

Water$ave DS is trusted across a wide range of applications, including:

  • Mine haul roads
  • Construction sites
  • Unsealed rural roads
  • Earthmoving projects
  • Bulk material handling areas

Any dry, dusty surface where traditional dust suppression falls short can benefit from this polymer-based approach.

 

Smarter Dust Control Starts Here

If you’re tired of relying on constant watering, Water$ave DS offers a modern & effective solution. With its ability to stabilise soil & suppress dust more efficiently, it’s an ideal choice for environmentally conscious, cost-effective site management.

 

Learn more about Water$ave Dust Suppression or order online:

https://www.polymerinnovations.com.au//dust-suppression.html

 

 

Related Products

TOP