Why choose Water$ave Dust Suppression (DS)?

Water$ave Dust Suppression is cost effect & efficient in controlling dust. It can assist with reducing the volume & frequency of watering by up to 50%, saving you time, money & water. The addition of a small quantity of Water$ave DS to your water cart will give superior results to using water alone to control dust. It is simple to use & is suitable for jobs of any size.

Water$ave DS is Non-toxic, biodegradable & environmentally friendly. It is also Classified as non-hazardous by Worksafe & GHS. (SDS available here)


What Is Water$ave DS?

Water$ave DS is a lineal, anionic polymer in powdered form. Water$ave DS is soluble in water & even in very low concentrations, increases the viscosity of the water. The polymer permeates & aggregates fine particles, making them large & heavy enough that they won’t blow away or run off.



Add Water$ave DS slowly to the water cart while filling to prevent gel blocking (polymer that is undissolved in blocks). Then agitated for a period of time before use to activate the polymer molecules. For best results the polymer/water solution should be circulated for at least 15 minutes prior to use. The solution should be recirculated if left to settle for more than 30 minutes.

*For light traffic, start with 100gm per 1000L of water. This will treat 350m2 – 500m2.

*For heavy traffic, start with 200gm per 1000L of water. This will also treat 350m2 – 500m2.

*** Dosage rates will vary from site to site, depending on traffic, wind, & soil type. The above rates should be used as a guide only & the application rate can be tailored to the site’s unique requirements. Contact us if your require a product support team member to assist in tailoring your application rate.

Need Help?

Our product support team members can help answer any of your questions & assist in application requirements. Click here for their details or to send us enquiry.


Where Do I Get It?

Water$ave Dust Suppression is available online, buy now