Banner 1

Water$ave Hydro-Tac

storehydrotac

A tackifier is an adhesive compound used in hydroseeding (or hydromulching). Acting as a 'glue' it can be a resin based or a polymer based mixture used to increase the 'tack' or stickiness of the hydroseed mulch to be mixed, this may contain water, seeds & fertilisers. This hydromulch 'mix' is then pumped over the area to be treated.

 

Hydroseeding is a land reclamation process often used on cleared, steep or damaged land that uses a slurry of seeds, dyes & mulch. The slurry is transported & applied via a water tank or IBC then sprayed over the ground in a uniform layer to promote the new growth of native plants preventing air pollution, soil erosion & undue water runoff.

 

fig_10_3_2_9

Water$ave Hydro-Tac is a specific linear polyacrylamide, called PAM. Using PAM tackifiers is one best ways to hydroseed; retaining more moisture in the mulch to keep it in place & prevents messy applications without 'splashing' onto embankments, paths & roadways.

 

Water$ave Hydro-Tac does not 'glue' the mulch to the soil. It actually hydrates & conglomerates the soil particles, making them bigger & heavier. Therefore making it much more difficult to displace on embankments, damaged land & hillsides making it perfect for steep slopes.

 

'Organic' tackifiers such as guar gum will 'tack' only for a short time (usually before the roots & soil have established properly) & do not retain water at all therefore not all seeds will germinate & develop evenly, leading to further soil erosion.

 

Water$ave Hydro-Tac is a specific polyacrylamide (or PAM) tackifier that last longer & at lower application rates produce the same 'tack' as organic tackifiers.

 

Water$ave Hydro-Tac is a 'stand alone' tackifier that does not necessarily require mulch or additives. It is a blend of specific lineal polyacrylamides for hydroseeding projects that retain moisture & soil structures for longer time periods than other polymer tackifiers. Note: For general hydroseeding in urban areas & road embankments Water$ave Hydro may be suitable.

 

Water$ave Hydro-Tac is an excellent 'straw tackifier' that is designed to break down as the plants' root systems penetrate & hold the soil structures in place. Highly effective in the young regrowth of trees, shrubs, bushes & saplings to assist in revegetation & reforestation especially in dry & remote locations.

 

Water$ave Hydro-Tac is available in 5kg, 10kg, 15kg & 18kg pails the Online Store.

Water$ave Hydro-Tac's key benefits include:

HYDROTAC18KG3disc

    • 'Stand alone' tackifier, less water & no mulch required.
    • Less required for the same amount of 'tack'.
    • Enhances plant seeding, growth & survival.
    • Increase the water holding capacity of soils.
    • No splashing, accurate application.
    • Breaks down naturally as root systems are established.
    • Reduces soil erosion.
    • Reduce watering frequency by up to 50%.
    • Protect the environment against drought & groundwater pollution.
    • Improve physical properties of compact soil.
    • Reduce water evaporation from soil.
    • Limits leaching of nutrients & fertilisers.
    • Improves soil porosity & aeration that stimulates plant growth.
    • Non toxic, environmentally friendly & biodegradable.
    • Same methods no matter the scale.
    • Full documentation & backup support.
    • Delivered to your door nationwide or worldwide.

Contact Us now for more information. 



Water$ave Hydro-Tac is available in 5kg, 10kg, 15kg & 18kg pails the Online Store.

 

Not sure which size you need? Our Polymer Calculator can help.


 calculator  store5   catalogue  



Tags: hydroseeding , reforestation , revegetation , sediment erosion control , grass seeding , soil erosion , products , native plants , tackifier
Dam Details

Testimonials