Water$ave PL Plug Range

Polymer Innovations Water$ave Plug is the best polymer based dam or pond sealant that is 100% customisable to your specific environment.
Whether the leak is in the base, wall, through rock or any soil type Polymer Innovations has the specific Water$ave PL dam sealant to put an end to your water losses.

The best time to treat your leaking dam with Water$ave PL Plug is when there is water in the dam, especially after recent rain.
While there is water about & your dam is filling, stop those dam leaks before it costs you a lot more money.
Putting your crops, stock & livelihood at risk.

There are other ways of sealing your dam using such products as bentonite clay, lime or with a lining.
Most of these solutions have to be implemented when the dam is built.
Even then due to time or money restrictions these dams are not built as well as they should be where such things as soil conditions & seasonal changes are not considered.

Water$ave PL Plug & Seep is easy to apply.
Just sprinkle over the surface of the water on a quiet day from a small dinghy or boat.
Then allow 7 - 10 days depending on the rate of leak, to start saving water & money.

The Water$ave Plug Range is a blend of lineal & cross linked polymers that are 99% insoluble, non toxic & biodegradable.
It will not harm plants, fish, yabbies or livestock.

This polymer is known as a Polyacrylamide, a combination of two monomers: Acrylamide & Potassium Acrylate. It’s charge density & molecular weight can be controlled by the ratio of acrylamide & potassium acrylate.
This allows us to customise its charge depending on the soil to be bonded, even in silty or sandy soils.

Water$ave PL locates the leak & seals it.
Even if you don't know exactly where the leak is our polymers will locate the outflow & stop it.

Flora Gel

Do you have a wedding or function coming up?  
Would you like to make a statement with a unique way of displaying your favourite flowers from your garden? 

Create beautiful floral arrangements & stunning centrepieces with Flora Gel.   

Polymer Innovations Flora Gel has been specifically designed for the cut flower & floriculturist industry to help preserve the life of cut flowers.
Flowers can be stored, packed, transported & displayed without extra handling.
 
Flora Gel is a specific polymer that can absorb & retain large quantities of water & nutrients. 
Then gradually release the absorbed water & nutrients when required , allowing the plants or flowers to flourish. 

Not only that Flora Gel has multiple uses for the floral, function, entertainment or hospitality industries.  
 
This extremely versatile gel can be used in restaurants, weddings, functions & parties as: 

• Floral displays.
• Coloured gels for displays & centrepeices. 
• Oil burners & floating candles.
  
• Themed parties.
• Ice & snow displays
  
• Jelly wrestling.
• Cool gel packs.
• Smelly jelly.
  
• Whatever!  

Flora Gel is safe, easy to use, biodegradable & non toxic.

D'ziner Snow

D'ziner Snow is a unique polymer bead that absorbs large amounts of water.

Once the beads are expanded, D'ziner Snow is 99% water, refracting light in such a way that it imitates natural ice crystals.
Creating an amazing similarity to real snow.

D'ziner Snow creates an authentic snow atmosphere in motion pictures, TV commercials, promotional events & exhibitions.  
Used all year round in shop displays, weddings, functions, birthdays, themed parties, snow parties, winter parties, xmas parties, snow hobbies ...all sorts of fun!

Just a small amount of this amazing polymer powder added to water transforms into sparkling white snow in minutes. 

The unique polymer beads when kept out of uv light, dry, clean & free of contaminants can be reused again & again!
Disposal is easy. It can be shovelled, swept or vacuumed away.

Polymer Innovation's D'ziner Snow is safe for the environment, non toxic, UV sensitive & biodegrabable.

Water$ave PT Plantation

Deforestation of native vegetation creates many problems such as soil erosion or air pollution.
Ecology destruction effects both animal & plant species that can then contribute to disease, food shortages & a general imbalance in all ecosystems that we share.

Deforestation reduces the planets capacity to convert carbon dioxide to oxygen which many say is a major contributor to global warming.

Polymer Innovations Water$ave PT Plantation is effective in the revegetation & reforestation of trees, bushes, tube stock & saplings.

Water$ave PT reduces the mortality rate caused by transplant shock & also enhances root development encouraging more rapid growth & production.

Water$ave PT is non toxic & biodegradable, reduces the leaching of any introduced fertilizer, minimising evaporation from the soil whilst improving porosity & aeration.

Increasing biodiversity which leads to the proliferation of necessary native species such as birds or worms & decreasing barren land that leads to soil erosion, ecological damage & the proliferation of disease & pests.

Water$ave DS Dust Suppression

Dust suppression is important in heavy industry especially those that reside in open environments such as mines, roads, airstrips or construction sites that pollute the air & blow it elsewhere.
Important also for the workers & nearby residents who have to deal with it on a daily basis.

Suppressing & controlling the amount of dust & light soil in the air is important in many ways.
Such as keeping people & animals free from allergies & asthma, reducing light soil erosion, ecological damage & airborne pollution.
Also, reducing wear & tear on nearby expensive equipment.

Finding ways to effectively control it in a simple & cost effective manner is beneficial for everyone.

Polymer Innovations Water$ave DS Dust Suppression meets this demand with it's own specific polymer blend for dust pollution control.

Water$ave DS is an extremely effective dust stabilising agent for:

• Soil waste & mineral dumps.
• Civil & commercial construction sites.
• Open cut & underground mine.
• Coal stock pile management.
• Quarries & landfills.
• Unpaved roads, parking lots & open areas.
• Rural roads, airstrips & other dust prone areas.

Local coal mines in the Hunter Valley with serious dust concerns use Water$ave DS on a regular basis.

Water$ave DS has become a simple, proven, economic & environmentally friendly solution to control dust & light soil erosion.

Water$ave Flobind

Polymer Innovations has special blends of polymers that has multiple uses & is mixed with other products to come up with customisable solutions for our clients.

Water$ave Flobind is one of these amazing polymers blends.
Flobind is a lineal polymer in powdered form that instead of forming a gel as most of our polymers do, Flobind turns into a slime.
This slime infiltrates water quicker & controls finer soil particles more effectively such as dust.
This slimey polymer when mixed with other blends allows us to be even more effective with our polymers such as improved blends for soil erosion, sediment control, dust pollution, dam sealing in more porous soils & binding assistance with hydroseeding.

This slimey polymer is extremely versatile & can assist with all water & pollution issues.
It is a water soluble polymer specifically designed to control soil erosion & improve water infiltration.

It flocculates suspended fine soil particles & stabilises existing soil structure. 
Flobind is ideal for smaller applications where powder or emulsion dosing systems are not practical.

This new product gives us an even greater ability to customise a solution for your water & pollution problems.
Whether it is used on its own or mixed with other blends our ability to cater a solution for you is assured.

Water$ave M Medium

Polymer Innovations garden specific polymer Water$ave M Medium has been a best selling product for us for years.
Used by agriculturalists, horticulturalists, groundskeepers, landscapers, weekend gardeners, sporting clubs & community groups to keep gardens looking as good as possible, especially during times of stress & low irrigation.

Water$ave M is used to improve the quality & efficiency of  gardens, vegetable patches & flower beds by reducing water usage & optimising the use of those water & nutrients by the plants.
Also as a result the leaching of nutrients & fertlisers is greatly reduced, preventing ground water pollution.

Water$ave M is a specific blend of premium cross linked polymers to assist with the growth & transplantation of plants & shrubs.

It is a potassium based product that improves the efficiency of fertilisers & nutrients either introduced or existing in the soil.
It has a large surface area per gram that allows better distribution around the root zone, this means that only a small amount of this product is required to be effective.

Water$ave M quickly uptakes the water & then gradually releases the water & nutrients for years as it is required by the plants, reacting again each time it is irrigated.
This reduces watering by a significant amount therefore reducing all types of related costs & increasing land values.

Water$ave M Medium can be mixed into the soil & fertiliser before planting & due to it's easy application can also be applied to rockeries & pot plants.
Water$ave M is a market leader in plant growth polymers that can be easily used on any scale.

Water$ave HY Hydro

Water$ave HY Hydro is a special polymer blend that can be efficiently applied for hydroseeding operations in mountainous areas or road embankments.
HY maximises plant establishment & holds the components together preventing loss of material through wind & water erosion.

Hydroseeding (or hydro-mulching) is a planting process which utilises a slurry of seed & mulch.
The slurry is transported in a tank, either truck or trailer mounted & sprayed over prepared ground in a uniform layer.

Hydroseeding is an alternative to the traditional process of broadcasting or sowing dry seed.
It promotes quick germination & inhibits soil erosion.

Water$ave HY prevents cellulose mulch from becoming hardpan during a dry spell.
The mulch remains aerated allowing the seeds to sprout quickly.

Water$ave HY Hydro also reduces the amount of mulch required.

Water$ave TF Turf 

Polymer Innovation's Water$ave TF Turf is a special polymer formulation that can be used throughout the growth cycle of lawns & sods.

Water$ave TF ensures good germination & fast root development for the even growth of lawns.  

The rooting of the sod is faster, increasing growth efficiency.

The collection & storage of rain & irrigation water by the Water$ave TF polymers reduces labour & water costs, as well as providing relief for difficult growth areas & hot spots that are vulnerable to drying out & going brown.

TF is widely used in turf landscaping for decorative lawns, golf courses, bowling greens, parks & gardens.
Water$ave TF can be applied straight to the soil before lawn seeding or before the turf is rolled out.

The ability to grow good looking even lawn in a dry environment is difficult & requires a lot of water & man hours especially during the summer months when water restrictions are prevalent.

Water$ave TF is a market leader in lawn growth polymers that can be easily used on any scale.

SAP HPF P4 High Performance Fines

Polymer Innovations SAP HPF P4 High Performance Fines is a new formula for our SAP range of products.
This SAP range has a proud reputation in Australia's most productive mines especially in the Hunter Valley.
Polymer Innovations has developed this new SAP (Super Absorbent Polymer) known as SAP HPF P4 that addresses the unique requirements of these industries.

SAP HPF P4  has polymers that target & remove water affected sludges & slimes that is even more effective than standard SAP HPF.

Toxic construction & mining water ingress issues are dealt with quickly by SAP HPF P4 High Performance Fines.
SAP HPF P4 reduces damage to the surrounding environment & removes hazardous material from the work area that can be caused by water, mud, toxins,  hydrocarbons, oil or sludge.

Muddy water that is too thick to pump or too watery to shovel up, can be thickened or solidified quickly by adding SAP HPF allowing for fast & easy removal.

SAP HPF P4 is designed for critical applications where production is affected by water based slurries.
Recovered waste can be transported to the surface on conveyors without extended periods of downtime or reduction in productivity.

SAP HPF P4 contains very small polymers for an accurate application to the targeted area, for a more effective removal of water affected slimes & slurries.
HPF P4 is particularly well suited for dredging work.

However varying conditions occur all the time & the correct SAP for each customer is determined on a case by case basis.

Water$ave BA Broadacre

Polymer Innovations Water$ave BA Broadacre is used to increase the efficiency of available water in your crop's soil profile.
It is specifically designed for non irrigated broadacre crops.

Water$ave BA will absorb & redistribute the nutrients & fertiliser providing a buffer suited to the crops water demands whilst minimising evaporation from the soil.

Farmers who use Water$ave BA report: 

• Better crop seeding strike rates.
  
• Stronger broadacre crop root development.
• Stronger growth rates during times of stress.
• Improved crop establishment. 
• Better crop resilience to the effects of weak intermittent rain & drought.

Water$ave BA is applied into the soil with the fertiliser & seed stock.

After initial irrigation Water$ave BA will hold that water throughout the growth cycle of the crop without any further irrigation required.

SAP HD Heavy Duty

Polymer Innovations SAP HD Heavy Duty has a proud reputation in Australia's most productive mines especially in the Hunter Valley.
Polymer Innovations has developed a specific SAP (Super Absorbent Polymer) known as SAP HD that addresses the unique requirements of these industries.

Toxic construction & mining water ingress issues are dealt with quickly by SAP HD Heavy Duty.
SAP HD reduces damage to the surrounding environment & removes hazardous material from the work area that can be caused by water, mud, coal slurry or coal sludge.

SAP HD Heavy Duty absorbs large quantities of water present in mining, construction, roadways & other water affected areas.
Muddy water that is too thick to pump or too watery to shovel up, can be thickened or solidified quickly by adding SAP HD allowing for fast & easy removal.

In mining SAP HD is designed for critical applications where production is affected by water based slurries.
In underground mining to clean up development roadways for long wall & infastructure moves that are transported via conveyer belt or ROM feed. In open cut mines to recover slimes from sumps & dams & in coal handling preparation plants (CHPP).
Recovered waste can be transported to the surface on conveyors without extended periods of downtime or reduction in productivity.

SAP HD is suited for larger scale instances of slimes, slurries or sludges to be controlled or removed.

However varying conditions occur all the time & the correct SAP for each customer is determined on a case by case basis

SAP HPF High Performance Fines

Polymer Innovations SAP HPF High Performance Fines has a proud reputation in Australia's most productive mines especially in the Hunter Valley.
Polymer Innovations has developed a specific SAP (Super Absorbent Polymer) known as SAP HPF that addresses the unique requirements of these industries.

Toxic construction & mining water ingress issues are dealt with quickly by SAP HPF High Performance Fines.SAP HPF reduces damage to the surrounding environment & removes hazardous material from the work area that can be caused by water, mud, coal slurry or coal sludge.

SAP HPF High Performance Fines absorbs large quantities of water present in mining, construction, roadways & other water affected areas.
Muddy water that is too thick to pump or too watery to shovel up, can be thickened or solidified quickly by adding SAP HPF allowing for fast & easy removal.

In mining SAP HPF is designed for critical applications where production is affected by water based slurries.
In underground mining to clean up development roadways for long wall & infastructure moves that are transported via conveyer belt or ROM feed. In open cut mines to recover slimes from sumps & dams & in coal handling preparation plants (CHPP).
Recovered waste can be transported to the surface on conveyors without extended periods of downtime or reduction in productivity.

SAP HPF contains smaller polymers for quick, targeted removals of water ingress.
HPF is also well suited for dredging work.

However varying conditions occur all the time & the correct SAP for each customer is determined on a case by case basis.