Water$ave PL Plug Range

Polymer Innovations Water$ave Plug is the best polymer based dam or pond sealant that is 100% customisable to your specific environment.
Whether the leak is in the base, wall, through rock or any soil type Polymer Innovations has the specific Water$ave PL dam sealant to put an end to your water losses.

The best time to treat your leaking dam with Water$ave PL Plug is when there is water in the dam, especially after recent rain.
While there is water about & your dam is filling, stop those dam leaks before it costs you a lot more money. Putting your crops, stock & livelihood at risk.

There are other ways of sealing your dam using such products as bentonite clay, lime or with a lining.
Most of these solutions have to be implemented when the dam is built.
Even then due to time or money restrictions these dams are not built as well as they should be where such things as soil conditions & seasonal changes are not considered.

Water$ave PL is a blend of lineal & cross linked polymers that are 99% insoluble, non toxic & biodegradable.
It will not harm plants, fish, yabbies or livestock.

This polymer is known as a Polyacrylamide, a combination of two monomers: Acrylamide & Potassium Acrylate. It’s charge density & molecular weight can be controlled by the ratio of acrylamide & potassium acrylate. This allows us to customise its charge depending on the soil to be bonded, even in silty or sandy soils.

Water$ave PL locates the leak & seals it.
Even if you don't know exactly where the leak is our polymers will locate the outflow & stop it.

When applied correctly Water$ave PL Plug is the easiest, most cost effective polymer dam sealing product on the market anywhere in the world.

Water$ave PT Plantation

Deforestation of native vegetation creates many problems such as soil erosion or air pollution.
Ecology destruction effects both animal & plant species that can then contribute to disease, food shortages & a general imbalance in all ecosystems that we share.

Deforestation reduces the planets capacity to convert carbon dioxide to oxygen which many say is a major contributor to global warming.

Polymer Innovations Water$ave PT Plantation is effective in the revegetation & reforestation of trees, bushes, tube stock & saplings.

Water$ave PT reduces the mortality rate caused by transplant shock & also enhances root development encouraging more rapid growth & production.

Water$ave PT is non toxic & biodegradable, reduces the leaching of any introduced fertilizer, minimising evaporation from the soil whilst improving porosity & aeration.

Increasing biodiversity which leads to the proliferation of necessary native species such as birds or worms & decreasing barren land that leads to soil erosion, ecological damage & the proliferation of disease & pests.

Water$ave DS Dust Suppression

Dust suppression is important in heavy industry especially those that reside in open environments such as mines, roads, airstrips or construction sites that pollute the air & blow it elsewhere.
Important also for the workers & nearby residents who have to deal with it on a daily basis.

Suppressing & controlling the amount of dust & light soil in the air is important in many ways.
Such as keeping people & animals free from allergies & asthma, reducing light soil erosion, ecological damage & airborne pollution.
Also, reducing wear & tear on nearby expensive equipment.

Finding ways to effectively control it in a simple & cost effective manner is beneficial for everyone.

Polymer Innovations Water$ave DS Dust Suppression meets this demand with it's own specific polymer blend for dust pollution control.

Water$ave DS is an extremely effective dust stabilising agent for:

• Soil waste & mineral dumps.
• Civil & commercial construction sites.
• Open cut & underground mine.
• Coal stock pile management.
• Quarries & landfills.
• Unpaved roads, parking lots & open areas.
• Rural roads, airstrips & other dust prone areas.

Local coal mines in the Hunter Valley with serious dust concerns use Water$ave DS on a regular basis.

Water$ave DS has become a simple, proven, economic & environmentally friendly solution to control dust & light soil erosion.

Water$ave Flobind

Polymer Innovations has special blends of polymers that has multiple uses & is mixed with other products to come up with customisable solutions for our clients.

Water$ave Flobind is one of these amazing polymers blends.
Flobind is a lineal polymer in powdered form that instead of forming a gel as most of our polymers do, Flobind turns into a slime.
This slime infiltrates water quicker & controls finer soil particles more effectively such as dust.
This slimey polymer when mixed with other blends allows us to be even more effective with our polymers such as improved blends for soil erosion, sediment control, dust pollution, dam sealing in more porous soils & binding assistance with hydroseeding.

This slimey polymer is extremely versatile & can assist with all water & pollution issues.
It is a water soluble polymer specifically designed to control soil erosion & improve water infiltration.

It flocculates suspended fine soil particles & stabilises existing soil structure. 
Flobind is ideal for smaller applications where powder or emulsion dosing systems are not practical.

This new product gives us an even greater ability to customise a solution for your water & pollution problems.
Whether it is used on its own or mixed with other blends our ability to cater a solution for you is assured.

Water$ave M Medium

Polymer Innovations garden specific polymer Water$ave M Medium has been a best selling product for us for years.
Used by agriculturalists, horticulturalists, groundskeepers, landscapers, weekend gardeners, sporting clubs & community groups to keep gardens looking as good as possible, especially during times of stress & low irrigation.

Water$ave M is used to improve the quality & efficiency of  gardens, vegetable patches & flower beds by reducing water usage & optimising the use of those water & nutrients by the plants.
Also as a result the leaching of nutrients & fertlisers is greatly reduced, preventing ground water pollution.

Water$ave M is a specific blend of premium cross linked polymers to assist with the growth & transplantation of plants & shrubs.

It is a potassium based product that improves the efficiency of fertilisers & nutrients either introduced or existing in the soil.
It has a large surface area per gram that allows better distribution around the root zone, this means that only a small amount of this product is required to be effective.

Water$ave M quickly uptakes the water & then gradually releases the water & nutrients for years as it is required by the plants, reacting again each time it is irrigated.
This reduces watering by a significant amount therefore reducing all types of related costs & increasing land values.

Water$ave M Medium can be mixed into the soil & fertiliser before planting & due to it's easy application can also be applied to rockeries & pot plants.
Water$ave M is a market leader in plant growth polymers that can be easily used on any scale.

Water$ave HY Hydro

Water$ave HY Hydro is a special polymer blend that can be efficiently applied for hydroseeding operations in mountainous areas or road embankments.
HY maximises plant establishment & holds the components together preventing loss of material through wind & water erosion.

Hydroseeding (or hydro-mulching) is a planting process which utilises a slurry of seed & mulch.
The slurry is transported in a tank, either truck or trailer mounted & sprayed over prepared ground in a uniform layer.

Hydroseeding is an alternative to the traditional process of broadcasting or sowing dry seed.
It promotes quick germination & inhibits soil erosion.

Water$ave HY prevents cellulose mulch from becoming hardpan during a dry spell.
The mulch remains aerated allowing the seeds to sprout quickly.

Water$ave HY Hydro also reduces the amount of mulch required.

Water$ave TF Turf 

Polymer Innovation's Water$ave TF Turf is a special polymer formulation that can be used throughout the growth cycle of lawns & sods.

Water$ave TF ensures good germination & fast root development for the even growth of lawns.  

The rooting of the sod is faster, increasing growth efficiency.

The collection & storage of rain & irrigation water by the Water$ave TF polymers reduces labour & water costs, as well as providing relief for difficult growth areas & hot spots that are vulnerable to drying out & going brown.

TF is widely used in turf landscaping for decorative lawns, golf courses, bowling greens, parks & gardens.
Water$ave TF can be applied straight to the soil before lawn seeding or before the turf is rolled out.

The ability to grow good looking even lawn in a dry environment is difficult & requires a lot of water & man hours especially during the summer months when water restrictions are prevalent.

Water$ave TF is a market leader in lawn growth polymers that can be easily used on any scale.

Water$ave BA Broadacre

Polymer Innovations Water$ave BA Broadacre is used to increase the efficiency of available water in your crop's soil profile.
It is specifically designed for non irrigated broadacre crops.

Water$ave BA will absorb & redistribute the nutrients & fertiliser providing a buffer suited to the crops water demands whilst minimising evaporation from the soil.

Farmers who use Water$ave BA report: 

• Better crop seeding strike rates.
  
• Stronger broadacre crop root development.
• Stronger growth rates during times of stress.
• Improved crop establishment. 
• Better crop resilience to the effects of weak intermittent rain & drought.

Water$ave BA is applied into the soil with the fertiliser & seed stock.

After initial irrigation Water$ave BA will hold that water throughout the growth cycle of the crop without any further irrigation required.